Keith & Koep GmbH - i-PAN7: Flat 7 inch Touchpanel

The i-PAN7 Touchpanel is available in 4 different versions (LC, LC-E, CAN, WL). Refering to a requirement of an application the i-PAN7 Panel PC can be equiped with specific options. E.g. the device can be used for industrial operating (HMI), data collection and handling, navigation, mobile computer, multi media, or as a simple information display. The following listing shows the basic configuration of all i-PAN7 versions.

WVGA (800 x 480) 7 inch Touchscreen TFT
metal frame with mounting holes
SD/MMC Card socket
USB Host
20 bit stereo Audio (Headphone)
Microphone Input
Real Time Clock with Goldcap-Backup

The table shows the 4 product variants with additional features.
Please contact us if you would like to discuss another custom specific assembly.

i-PAN7 LC	i-PAN7 LC-E	i-PAN7 CAN	i-PAN7 WL
Ordercode 23100	Ordercode 23200	Ordercode 23300	Ordercode 23400
Trizeps IV 312MHz	Trizeps IV 312MHz	Trizeps IV 520MHz	Trizeps IV-WL (WLAN) 520MHz
64/32MB	64/32MB	64/32MB	128/32MB
RJ45 (Ethernet) on back side*
	Extension Connector 80 Pin**	Extension Connectors 80/26 Pin**	Extension Connectors 80 Pin**
		CAN-Bus SJA1000
		Audio amp 2 * 2,6W	Audio amp 2 * 2,6W
			NAND Flash 1GB
			GSM/GPRS Module/SIM
			GPS Receiver
			3D Accelerometer
Windows Embedded CE Lisense: Prof	Windows Embedded CE Lisense: Prof	Windows Embedded CE Lisense: Prof	Windows Embedded CE Lisense: Prof
299 EUR at 1pc. 249 EUR each at 100pcs.	309 EUR at 1pc. 259 EUR each at 100pcs.	339 EUR at 1pc. 279 EUR each at 100pcs.	469 EUR at 1pc. 399 EUR each at 100pcs.

* Der RJ45 Connector can be left out if not needed. The panel remains flat. (see photo).
** the i-PAN7 Connector Board can be connected through two extension Connectors. Click on the i-PAN7 CB link for more informations.