Connect USB-Slave-Connector to a Trizeps
- Schematic
  - Typical connection of USB-Slave-Connector
- Signals

Connect USB-Slave-Connector to a Trizeps

Applies to: Trizeps-IV(M), Trizeps IV WL, Trizeps-V.
Does not apply to: Trizeps-VI, Trizeps MX28 !!
See also: Trizeps USB-Driver

Schematic

Typical connection of USB-Slave-Connector

When choosing a protective-diode circuit (D1), choose one that has not got an internal pull-up!
If the USB-Slave is used for debugging-purpose only or if you need to reduce part-count, the reset-generator logic could be removed. Leave the voltage divider and maybe include a capacitor for signal-debounce.

Signals

Signal-Name	SODIMM-Pin	Remark
USBFN_SLAVE_DM	28	USB-differential-line neg.
USBFN_SLAVE_DP	30	USB-differential-line pos.
USBFN_SLAVE_DETECT	55	USB cable detect. (3,3V: cable plugged, 0V: cable not plugged)