Trizeps-IV(M)

• XScale PXA270 (312,416,520,624Mhz)
• Max. 64MB Strata-Flash Memory, Opt. 128MByte NAND-Flash
• Max. 128MByte Low-Power-SDRAM
• UCB1400-Codec for Audio, Mic, Headphone and Touchscreen Interface
• SDIO/SD/MMC, PCMCIA/CF, BT, IrDA, RS232, SPI, I2S, I2C
• Ethernet Controller 10/100Mbit 32 bit Bus Interface
• 2 x USB Host, onboard ISP1301 OTG Transceiver
• Camera Interface
• Trizeps III compatible

obsolete modules

• Change-Notice SW for new BSP change_of_audiotouch_codec_on_trizeps_modules
• Change-Notice TR-IV to TR-IVM triz-iv-change-notice.pdf
• Change-Notice Flash pcn_flash_85_to_65nm.pdf
• Product-Brief: trizeps4-2009-09-25.pdf
• Datasheet: Trizeps-IV triz-iv_1_3.pdf
• Datasheet: Trizeps-IV M triz-iv-m_1_1.pdf
• Pin-Mapping: trizeps4_sodimm200_v3.xls

• Bootloader for PXA270
• BSP for Trizeps IV
• Third party Linux-port

• 3D Model (stl) trizeps4.stl.zip
  
• 3D Model (step) trizeps4.stp.zip
  
• 3D Model (iges) trizeps4.igs.zip
  
• 3D Model (Rhino) trizeps4.3dm.zip
  

• 3D Model (stl) trizeps_iv_m.stl.zip
  
• 3D Model (step) trizeps_iv_m.stp.zip
  
• 3D Model (iges) trizeps_iv_m.iges.zip
  
• 3D Model (dxf) trizeps_iv_m.dxf.zip
  
• 3D Model (rhino) trizeps_iv_m.3dm.zip
  

• 0 .. 70 operating temperature incl. Davicom Ethernet
• -20 .. 85 operating temperature optional without Davicom Ethernet
• -40 .. 100 storage temperature

These measurements are only an indication of typical power consumption.
It is recommended to use a 3,3V voltage-regulator with 1A nominal output. The input voltage is rated to +3V3 +/- 5%
Running: maximum current measured during benchmark-test.
Idle: minimum current measured while OS is running, with no user activity or additional applications running. Idle is entered and exit automatically during inactivity with no time penality.
Suspend: current measured during suspend state. Suspend is entered with a call to GwesPowerOffSystem() or Start→Suspend. Suspend state can be exit with different events ( i.e. touch-press). Time penality to exit suspend is about 1 second.

Running at 520MHz, SystemBus and MemoryBus: 208MHz.
Bootloader-Version: 22.07.2008.
Windows CE 5.0 image based on MaxIE-project. (build 19.08.2008)

Running at 312MHz, SystemBus and MemoryBus: 208MHz.
Bootloader-Version: 22.07.2008.
Windows CE 5.0 image based on MaxIE-project. (build 19.08.2008)

Running at 520MHz, SystemBus and MemoryBus: 208MHz.
Bootloader-Version: 22.07.2008.
Windows CE 5.0 image based on MaxIE-project. (build 19.08.2008)

Running at 312MHz, SystemBus and MemoryBus: 208MHz.
Bootloader-Version: 22.07.2008.
Windows CE 5.0 image based on MaxIE-project. (build 19.08.2008)

Running at 520MHz, SystemBus and MemoryBus: 208MHz.
Bootloader-Version: 22.07.2008.
Windows CE 5.0 image based on MaxIE-project. (build 19.08.2008)

Running at 312MHz, SystemBus and MemoryBus: 208MHz.
Bootloader-Version: 22.07.2008.
Windows CE 5.0 image based on MaxIE-project. (build 19.08.2008)

Using Trizeps-IV 520MHz without Ethernet. Display Hitachi TX09, CF Card, Keyboard Controller, IrDA, Barcode Scanner, Dual-Cell LiIon (7.2V) Supply

Deep Idle (13MHz Mode) reduces Idle Current with negative impact on realtime behaviour !

(#)
RD Running with Display Backlight On
ID Idle/Deep-Idle with Display Backlight On
Id Idle with Display Backlight Off

Suspend < 8mA Total