Trizeps MX28

Front Back

• Low Cost, Small Formfactor 200 pin SODIMM only 67×25 mm !
• Low Power Freescale iMX287 CPU 454MHz ARM926EJ-S core with 16KB/32KB Cache
• 128 KBytes of integrated low-power on-chip SRAM
• 1280 bits of on-chip one-time-programmable (OCOTP) ROM
• NAND Flash 512 MByte SLC, Hardware BCH (up to 20-bit correction)
• 128MB 200 MHz 16-bit DDR2,
• PMU with high efficiency on-chip DC/DC, supports Li-Ion batteries incl.charging!
• LCD controller, up to 24-bit RGB (DOTCK) modes and 24-bit system-mode
• Pixel-processing pipeline (PXP) supports full path from color-space conversion, scaling, alpha-blending to rotation without intermediate memory access.
• 10/100 Dual IEEE® 1588 Ethernet with RMII support and L2 Switch
• One integrated Fast Ethernet Phy, One RMII for ext.Phy(4Bit to SODIMM)
• Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces
• LCD Controller with Touchscreen
• One USB2.0 OTG device/host controller and PHY
• One USB2.0 host controller and PHY
• SPDIF transmitter
• i2S Audio Codec SGTL5000
• 8 General purpose 12-bit ADC channels and single 2 Msps ADC channel
• Temperature sensor for thermal protection
• Onboard micro SD Card Slot (also wired out)
• Four synchronous serial ports (SSP) for SDIO/MMC/MS/SPI. Two can be used for SDIO/MMC/MS interfaces(supports SD2.0, eMMC4.4 and MSPro),and all can be used for the SPI interface.
• Five application Universal Asynchronous Receiver-Transmitters UARTs), up to 3.25 Mbps with hardware flow control
• One debug UART operating at up to 115 Kb/s using programmed I/O
• Two I2C master/slave interfaces, up to 400 kbps
• Four 32-bit timers and a rotary decoder
• Multiple connectivity ports ( SSP, SDIO, SPI, I2S)
• 3.3V I/O, 10 year lifetime (Industrial)

• Product-Brief: trizeps_mx28.pdf
• Pin List: trizepsmx28_v1r3_pinning.xls
• Datasheet:
• BSP Compact 7, Windows CE 6.R3: BSP for Trizeps-MX28

trizeps_mx28.stl
trizeps_mx28.stp
trizeps_mx28.igs
trizeps_mx28.3dm